Muller 2502 Stretch Wrap Pallet Wrapping System
Price: Please Contact
$4,750.00
323
posted
06.02.19
Available is a Muller 2502 Stretch Wrap System. It is in Excellent operating condition. It will apply stretch wrap to Pallet loads of product at a rate of up to 35 loads per hour with a load size of 50" X 50" X 92" high. Its operation takes a footprint of just over 11' diameter. It comes with operating manual.
I am asking only $4750.00 for it.
If interested please phone or text me at 780 862-1899
Here are the specifications for it:
Performance:
Productions speeds of 25 to 35 loads per hour
Standard load size: 48"L x 48"W
Standard load diagonal: 68" complete with 6" clearance
Standard load height: 92"H (with 20" film width)
Maximum load capacity: Unlimited (floor capacity)
Film Delivery
20" SG2000 Powered Prestretch Film Carriage (200%)
Virtually no neckdown
Strain gauge feedback prestretch system
Prestretch ratio from 100% to 300%
Standard prestretch ratio is 200%
Lubrication free on prestretch gear system
Tilted low profile film carriage allows wrapping to within 2 ± ½" from floor
Fully adjustable electronic film force control
Operating Controls
Omron PLC
Wrap Up cycle
Wrap Up/Down cycle
Low load banding cycle
Reinforce wrap cycle
Cycle pause feature
Life cycle counter (PLC based)
High speed wrap counting system
Film force adjustment
Film carriage Up/Down jog
Turntable jog button
Top Wrap selector (0 - 9)
Bottom wrap selector (0 - 9)
Programmable overwrap adjustment
Auto-height photoeye option
NEMA 12 dust-tight enclosure
Industrial grade NEMA 4 pushbuttons
Adjustable top and bottom carriage limits
Illuminated cycle start/stop button
Electrical Data
120 VAC, single phase, 15 AMP, 60 Hz
24" x 16" NEMA 12 control cabinet mounted on machine frame (CSA)
Rotary Arm
Structural steel arm weldment
Dual "V"-belt drive system
½ HP 90 VDC drive TNEV motor
Variable speed DC control (adjustable accel/decel)
Rotation speed adjustable to 12 RPM (higher speeds available)
Dual speed, self-indexing mast for positive alignment
Carriage Lift System
Flat belt lifting system
½ HP, 90 VDC TENV motor
Variable speed DC control complete with dynamic braking
"V"-Groove wheel guide system; smooth tracking
Separate Up/Down speed adjustment
I am asking only $4750.00 for it.
If interested please phone or text me at 780 862-1899
Here are the specifications for it:
Performance:
Productions speeds of 25 to 35 loads per hour
Standard load size: 48"L x 48"W
Standard load diagonal: 68" complete with 6" clearance
Standard load height: 92"H (with 20" film width)
Maximum load capacity: Unlimited (floor capacity)
Film Delivery
20" SG2000 Powered Prestretch Film Carriage (200%)
Virtually no neckdown
Strain gauge feedback prestretch system
Prestretch ratio from 100% to 300%
Standard prestretch ratio is 200%
Lubrication free on prestretch gear system
Tilted low profile film carriage allows wrapping to within 2 ± ½" from floor
Fully adjustable electronic film force control
Operating Controls
Omron PLC
Wrap Up cycle
Wrap Up/Down cycle
Low load banding cycle
Reinforce wrap cycle
Cycle pause feature
Life cycle counter (PLC based)
High speed wrap counting system
Film force adjustment
Film carriage Up/Down jog
Turntable jog button
Top Wrap selector (0 - 9)
Bottom wrap selector (0 - 9)
Programmable overwrap adjustment
Auto-height photoeye option
NEMA 12 dust-tight enclosure
Industrial grade NEMA 4 pushbuttons
Adjustable top and bottom carriage limits
Illuminated cycle start/stop button
Electrical Data
120 VAC, single phase, 15 AMP, 60 Hz
24" x 16" NEMA 12 control cabinet mounted on machine frame (CSA)
Rotary Arm
Structural steel arm weldment
Dual "V"-belt drive system
½ HP 90 VDC drive TNEV motor
Variable speed DC control (adjustable accel/decel)
Rotation speed adjustable to 12 RPM (higher speeds available)
Dual speed, self-indexing mast for positive alignment
Carriage Lift System
Flat belt lifting system
½ HP, 90 VDC TENV motor
Variable speed DC control complete with dynamic braking
"V"-Groove wheel guide system; smooth tracking
Separate Up/Down speed adjustment
